CO2 laser-assisted preparation of transparent Eu2Ti2O7 thin films

We present a laser-assisted preparation of transparent europium-titanate Eu₂Ti₂O₇ thin films with tailored structural and optical properties. We have evaluated the effects of the irradiation time on the structural and the optical properties of the films. This approach allows the preparation of nanocrystalline crack-free films and micro patterns. The amorphous thin films were prepared by a sol-gel method. The films were annealed by a CO₂ laser beam for various time intervals. The laser irradiation induced a crystallization process that resulted in the formation of Eu₂Ti₂O₇ nanocrystals. The nanocrystals regularly grew with increasing irradiation time reaching the size from 25?nm to 45?nm. A film of a thickness 480?nm exhibited an optical transmission of 91.9% that is close to the maximal theoretical limit. The film's refractive index at 632?nm was 2.26. A micrometric pattern was prepared by a direct laser writing followed by a wet chemical etching. Feasibility of the demonstrated approach, together with the high film's quality, and europium-titanate chemical resistivity open up many opportunities for advanced applications. The approach can be used for a preparation of protective coatings and integrated photonic devices such as planar optical waveguides and couplers.     

Enhanced UV- and visible-light driven photocatalytic performances and recycling properties of graphene oxide/ZnO hybrid layers

Light induced catalytic processes have attracted significant attention during the last years for wastewater treatment due to their efficiency in decomposition of organic contaminants. In this study we report the synthesis of graphene oxide (GO)/ZnO hybrid layers with high photocatalytic efficiency using laser radiation. The results show that the hybrid layers exhibit much improved photodecomposition efficiency as compared to pure GO or ZnO both under UV and visible-light irradiation. The enhanced photocatalytic efficiency of the hybrid as compared to the reference pure ZnO and GO layers was attributed to the contribution of GO to the separation and transport of the photogenerated charge carriers. Additionally, under visible light irradiation the organic molecules can act as first sensitizers in the degradation process. The recyclability of the layers was also investigated through repetitive photodegradation cycles under UV- or visible-light irradiation. After consecutive degradation runs, the hybrid photocatalyst layers were still stable and retained high degradation efficiency, ensuring reusability. The photocatalytic activity of the layers was correlated with the gradual change of their chemical structure during consecutive degradation cycles. Owing to the high photodegradation efficiency, reusability, and ease of recovery the synthesised hybrid layers consisting of easily available materials are suitable for environmental purification applications.     

Selection of metal hydrides-based thermal energy storage: Energy storage efficiency and density targets

Thermo-chemical energy storage based on metal hydrides has gained tremendous interest in solar heat storage applications such as concentrated solar power systems (CSP) and parabolic troughs. In such systems, two metal hydride beds are connected and operating in an alternative way as energy storage or hydrogen storage. However, the selection of metal hydrides is essential for a smooth operation of these CSP systems in terms of energy storage efficiency and density. In this study, thermal energy storage systems using metal hydrides are modeled and analyzed in detail using first law of thermodynamics. For these purpose, four conventional metal hydrides are selected namely LaNi₅, Mg, Mg₂Ni and Mg₂FeH₆. The comparison of performance is made in terms of volumetric energy storage and energy storage efficiency. The effects of operating conditions (temperature, hydrogen pressure and heat transfer fluid mass flow rates) and reactor design on the aforementioned performance metrics are studied and discussed in detail. The preliminary results showed that Mg-based hydrides store energy ranging from 1.3 to 2.4 GJ m^?3 while the energy storage can be as low as 30% due to their slow intrinsic kinetics. On the other hand, coupling Mg-based hydrides with LaNi₅ allow us to recover heat at a useful temperature above 330 K with low energy density ca.500 MJ m^?3 provided suitable operating conditions are selected. The results of this study will be helpful to screen out all potentially viable hydrides materials for heat storage applications.     

Calcium phosphate substrates with emulsion-derived roughness: Processing,characterisation and interaction with human mesenchymal stem cells

Calcium phosphates (CaP) have been the subject of several studies that often lack a systematic approach to understanding how their properties affect biological response. CaP particles functionalised with a pH-responsive polymer (BCS) were used to prepare microporous substrates (porosity between 70 and 75% and pore sizes of 5–20 μm) through the aggregation of oil-in-water emulsions by controlling solid loading, emulsification energy, pH, drying and sintering conditions. The combined effect of surface roughness (roughness amplitude, R_a between 0.9–1.7 μm) and chemistry (varying Hydroxyapatite/β-Tricalcium phosphate ratio) on human mesenchymal stem cells was evaluated. HA substrates stimulated higher cell adhesion and proliferation (especially with lower R_a), but cell area increased with β-TCP content. The effect of surface roughness depended of chemistry: HA promoted higher mineralising activity when R_a ～ 1.5 μm, whereas β-TCP substrates stimulated a more osteogenic profile when R_a ～ 1.7 μm. A novel templating method to fabricate microporous CaP substrates was developed, opening possibilities for bone substitutes with controlled features.     

A shift of the perceptual attributes of color due to the manifestation of the simultaneous contrast effect on a display

This research shows the effect of simultaneous contrast on a design solution that generates it, and it also shows how its manifestation affects the shift of perception attributes of the observer's color. In the conducted research, 55 subjects had to harmonize the primary stimuli from the reproduction obtained with the help of digital printing technology, with the primary stimuli presented on two computer screens. As a visual harmonization technique, simultaneous binocular harmonization was used. The primary stimuli were made achromatic, with a 50% Raster Tone value (RTV), and are surrounded by achromatic secondary stimuli whose values increase in steps from 10% RTV up to 100% RTV. A shift in the perceptual attributes of color has been shown with the help of the CIEDE2000 system. Using ANOVA with repeated-measures and Fisher's post hoc analysis, statistically significant differences were found between the perceived means of shift in the ΔC₀₀ chroma and ΔL₀₀ lightness on defined samples on both computer screens, while in the case of the ΔH₀₀ hue, no statistically significant differences were observed. The research also determined colorimetric differences in the ΔE₀₀ color difference. Moreover, the student's t test was used to determine that the effect is stronger when manifested on the Lenovo computer than on the Asus computer screen (P < .05).     

An approach for evaluating collaboration attributes in cluster-based companies

This paper presents an approach for evaluating collaboration attributes in companies operating in industrial clusters. From the literature review, we identified governance, geographic proximity, and trust as the main collaboration attributes in industrial clusters. For each of them, there is a set of related sub-attributes that composed the evaluation model. For developing the model, we used the graph theoretic approach (GTA), a methodology for multi-attribute assessment that considers interdependencies among elements of a system to provide an overall evaluation. We applied the model to five companies of a furniture cluster. The results showed the model allows for systematizing relationship management because it highlights the collaboration attributes that need to be improved. Furthermore, the application of the model may contribute to encouraging companies to develop collaborative practices.     

Syrah grape skin valorisation using ultrasound-assisted extraction: Phenolic compounds recovery,antioxidant capacity and phenolic profile

The influence of ultrasound power (1000–3000 W/L), citric acid concentration (0–3%) and solid:liquid ratio (1:5–1:15) on the phenolic compounds recovery and antioxidant capacity of Syrah grape skin extracts were evaluated. Total phenolic compounds varied from 6485 to 11732 mg gallic acid/100 g and monomeric anthocyanin content from 453 to 685 mg malvidin-3-glucoside/100 g. The antioxidant capacity measured by ORAC and ABTS methods ranged from 230 to 516 μmol Trolox/g and from 442 to 939 μmol Trolox/g, respectively. The most suitable conditions chosen for extraction, within the studied ranges, were 3000 W/L of power, 2.5% citric acid and solid:liquid ratio of 1:15. The extraction yield was satisfactory, with a recovery of 59% of the quantified phenolic compounds, with only 3 min of processing. Ultrasound was considered a suitable method as compared to the conventional extraction, improving the extraction of phenolic acids and facilitating their release.     

Magnetocaloric and magneto-transport properties of Gd10Co20Si70 alloy

We report the results of magnetic, thermodynamic, transport and magnetocaloric effect (MCE) studies of newly synthesized Gd_(10)Co_(20)Si_(70) alloy. These measurements confirm an antiferromagnetic transition at T_N=9 K. Both MCE and magnetoresistance (MR) show quadratic dependence on the applied magnetic field, indicating the presence of spin fluctuations in the alloy. The maximum values of the magnetic entropy change determined from the isothermal magnetization data for magnetic field change of 7 and9 T are found to be 10.5 and 15.6 J/kg·K, respectively. As a consequence of the spin fluctuations effect, the MCE peaks are pulled towards high temperature side as asymmetrically broadened peak. The MR attains a large positive value of 73%at 2 K in 8 T. The large MR and reversible MCE make this alloy an attractive multifunctional magnetic material.     

State-space ARIMA for supply-chain forecasting

ARIMA is seldom used in supply chains in practice. There are several reasons, not the least of which is the small sample size of available data, which restricts the usage of the model. Keeping in mind this restriction, we discuss in this paper a state-space ARIMA model with a single source of error and show how it can be efficiently used in the supply-chain context, especially in cases when only two seasonal cycles of data are available. We propose a new order selection algorithm for the model and compare its performance with the conventional ARIMA on real data. We show that the proposed model performs well in terms of both accuracy and computational time in comparison with other ARIMA implementations, which makes it efficient in the supply-chain context.